If you have a motorcycle in Fillmore NY, you understand that this is a seasonal proposition. Each winter, your motorcycle sits in the garage collecting dust while you wait for that first day of spring to take it for a ride. Because of this, it might not be ready to drive the second you pull it from the garage. There are some things you need to prep before it’s safe to ride.
At Walker and Associates Insurance Agencies Inc., we are here to help, so here are three things you need to get ready before you take your motorcycle out next summer.
Three Things to Check Before You Get Your Motorcycle Out
1. Check the Battery
Make sure your battery has a full charge before you take it out. You can use a multimeter to see how much power is left in the battery. If you don’t have a multimeter, check to see how quickly the engine starts when you turn the ignition. The battery is low if the engine takes a second to get going. Batteries tend to lose power if they sit for a long time without being started. It’s also a good idea to replace your battery if it’s over five years old.
Your brake pads can degrade over time as they sit in storage. You don’t want the surprise of them not working to sneak up on you on your first ride of the summer. To check your motorcycle’s brakes, put it on its center stand and pump them. You should be able to feel how much sponge is left in the padding. It’s also not a bad idea to change your brake fluid each season.
Bald tires are incredibly dangerous. Luckily, a simple eye test can tell you if they have enough tread to get out on the open road. You should also inspect the tires for any small cracks or dry rot that could have developed while in storage.
Schedule A Consultation Today
Before you get on the road, make sure your motorcycle is properly insured. At Walker and Associates Insurance Agencies Inc., we can help you determine the best coverage for you and your bike. We have been serving the Fillmore, NY area for years, helping motorcycle riders stay safe on the road.